NBN E 37-002-1977 0625 《交替内燃式发动机 正常的参考条件 功率，燃料消耗和润滑油消耗》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 8 041-1984 State system for ensuring the uniformity of measurements Radiometers for measuring alpha-active substances contamination of surfaces Calibration methods《ГСИ 测量表面受β-.pdf

GOST 8 044-1980 State system for ensuring the uniformity of measurements Diamond indentors of the hardness testing machines for metal and alloys Verification methods and means《ГСИ .pdf

GOST 8 046-2010 State system for ensuring the uniformity of measurements Optical dividing heads Verification procedure《国家测量一致性体系 光学分度头 核查程序》.pdf

GOST 8 050-1973 State system for ensuring the uniformity of measurements Reference conditions for linear and angular measuruments《国家测量统一性保证体系 长度及角度测量参考条件》.pdf

GOST 8 051-1981 State system for ensuring the uniformity measurements Permissible errors of measurement of linear dimensions to 500 mm《国家测量一致性保证体制 500mm线性尺寸允许误差》.pdf

GOST 8 052-1973 State system for ensuring the uniformity of measurements Differential pressure gauges with pneumatic output Verification methods and means《ГСИ 具有气动输出信号的差动式压力计 检定方法与.pdf

GOST 8 053-1973 State system for ensuring the uniformity of measurements Pressure combined pressure-vacuum vacuum gauges and draught gauges with pneumatic output signals Methods of.pdf

GOST 8 061-1980 State system for ensuring the uniformity of measurements Verification schedules Scope and layont《国家测量统一性保证体系 鉴定表 范围及布局》.pdf

GOST 8 062-1985 State system for ensuring the uniformity of measurements State special standart and state verification schedule for measuring means of hardness on Brinell scales《国家.pdf