NBN E 52-021-1976 6250 《搬运车 电力搬运车的驱动电池 电压》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C1291-2000a(2010) Standard Test Method for Elevated Temperature Tensile Creep Strain Creep Strain Rate and Creep Time-to-Failure for Advanced Monolithic Ceramics《高级单片陶瓷的高温抗拉蠕变.pdf

ASTM C1291-2016 Standard Test Method for Elevated Temperature Tensile Creep Strain Creep Strain Rate and Creep Time-to-Failure for Monolithic Advanced Ceramics《高级单片陶瓷的高温抗拉蠕变应变 蠕变应变.pdf

ASTM C1291-2018 Standard Test Method for Elevated Temperature Tensile Creep Strain Creep Strain Rate and Creep Time to Failure for Monolithic Advanced Ceramics《高级单片陶瓷的高温抗拉蠕变应变 蠕变应变.pdf

ASTM C1292-2000(2005) Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures《室温下连续纤维增强高级陶瓷剪切强度的标准试验方法》.pdf

ASTM C1292-2010 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures《室温下连续纤维增强高级陶瓷剪切强度的标准试验方法》.pdf

ASTM C1292-2016 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures《环境温度下连续纤维强化先进陶瓷的抗剪切强度的试验方法》.pdf

ASTM C1293-2006 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction《测定由于碱-硅石反应引起的混凝土长度变化的标准试验方法》.pdf

ASTM C1293-2008a Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction.pdf

ASTM C1293-2008b Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction《由于碱-硅反应引起的混凝土长度变化测定的标准试验方法》.pdf