NBN E 66-105-1982 1250 《圆柱形头钻机 长系列 尺寸》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 2090-2005 en Aluminium alloy AL-P2024-T3 Clad sheet and strip 0 3 mm less than or equal to a less than or equal to 6 mm《铝合金AL-P2024-T3 覆层薄板和带材 0 3 mm≤a≤6 mm》.pdf

EN 2092-2005 en Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0 4 or = to a or = to mm《航空航天系列 AL-P7075 T6或T62型铝合金 覆层铝合金板材及带材 0 4mm≤a≤6mm》.pdf

EN 2093-1992 en Aluminium Alloy AL-P7009-T74 Hand Forgings 20 mm Less Than or Equal to a Less Than or Equal to 150 mm《航空航天系列 AL-P7009-T74铝合金 2Qmm≤a≤150mm手工锻件》.pdf

EN 2094-1992 en Aluminium Alloy AL-P7009-T74 Die Forgings 3 mm Less Than or Equal to a Less Than or Equal to 150 mm《航空航天系列 AL-P7009-T74铝合金 3mm≤a≤150mm模锻件》.pdf

EN 21-1988 en Wood Preservatives Determination of the Toxic Values Against Anobium Punctatum (De Geer) by Larval Transfer (Laboratory Method)《木材防腐剂 通过幼虫转化对家具窃蠹有毒值的测定(实验室法)》.pdf

EN 210-1999 en Steel Drums - Non-Removable Head (Tight Head) Drums with a Minimum Total Capacity of 216 5 l《钢桶 最小总容量为216 5升的不可拆卸盖(密封盖)柱桶》.pdf

EN 2100-1992 en Aerospace Series Aluminium Alloy AL-P2014A T4511 Extruded Bars and Sections a or D Less Than or Equal to 200 mm《航空航天系列 AL-P2014A-T4511铝合金 a D≤200挤压棒和型材》.pdf

EN 2101-1991 en Chromic Acid Anodizing of Aluminium and Wrought Aluminium Alloys《航空航天系列 铝合金和锻铝合金铬酸阳极化》.pdf

EN 2103-1-1991 en Steel Nickel Base and Cobalt Base Alloy Remelting Stock and Castings - Technical Specification - Part 1 - General Requirements《航空航天系列 钢、镍基和钴基合金再熔坯料和铸件 技术规范 第1部分 一.pdf