NBN EN ISO 5810-1994 7500 Starches and derived products - Determination of chloride content - Potentiometric method《阿米酮，淀粉和衍生品 氯化物含量测定 电位测定法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 18911-1973 Technical 1-naphthol -2-carboxylic acid Specifications《工业1-氧化物-2-萘(甲)酸 技术条件》.pdf

GOST 18918-1985 Ammophos Specifications《安福粉 技术条件》.pdf

GOST 18922-1973 Screw plug-gauges with full-form inserts for pipe cylindrical threads from 1 16 up to 4 nominal diameter Construction and basic sizes《直径 1 16 ～4 圆柱管螺纹用带全牙型镶块的螺纹塞规 .pdf

GOST 18923-1973 Screw plug-gauges with truncated form inserts for pipe cylindrical threads from 1 16 up to 4 nominal diameter Construction and basic sizes《直径 1 16 ～4 圆柱管螺纹用带短牙型镶块.pdf

GOST 18924-1973 Screw double-ended plugs with inserts for pipe cylindrical threads from 1 16 up to 1 1 2 nominal diameter Construction and basic sizes《直径 1 16 ～1 1 3 圆柱管螺纹用带镶块双头螺.pdf

GOST 18925-1973 Screw plug-gauges with full form gaging members for pipe cylindrical threads from 1 3 4 up to 3 3 4 nominal diameter Construction and basic sizes《直径 1 3 4 ~3 3 4 .pdf

GOST 18926-1973 Screw plug-gauges with truncated form gaging members for pipe cylindrical thread from 1 3 4 up to 3 3 4 nominal diameter Construction and basic sizes《直径 1 3 4 ~3 3.pdf

GOST 18927-1973 Full form screw plug-gauges for pipe cylindrical threads from 4 up to 6 nominal diameter Construction and basic sizes《直径 4 ～6 圆柱管螺纹用带全牙型的螺纹塞规 结构及基本尺寸》.pdf

GOST 18928-1973 Truncated form screw plug-gauges for pipe cylindrical threads from 4 up to 6 nominal diameter Construction and basic sizes《直径 4 ～6 圆柱管螺纹用带短牙型的螺纹塞规 结构及基本尺寸》.pdf