NBN G 55-008-1979 6250 《纺织 通过摆动的落锤对织物进行撕裂力的测定：ELMENDORF撕破强力机法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SJ 20810A-2016 印制板尺寸与公差.pdf

SJ 20873 2-2016 CW-51型高精度水平仪详细规范.pdf

SJ 20883-2003 印制电路组件装焊后的清洗工艺方法.pdf

SJ 20987 1-2016 LCM104XA04型加固液晶显示器详细规范.pdf

SJ 21040-2016 低温共烧陶瓷多层基板制造主要工艺设备术语.pdf

SJ 21041-2016 低温共烧陶瓷多层基板制造工艺设备通用规范.pdf

SJ 21042-2016 低温共烧陶瓷多层基板制造联线测试验证产品技术要求.pdf

SJ 21043-2016 生瓷切片机通用规范.pdf

SJ 21044-2016 生瓷打孔机通用规范.pdf