NBN G 55-009-1984 6250 《纺织 织物张弛中尺寸的变化（由气蒸中蒸汽压力所造成的织物张弛）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 4293-1998 Aerospace Series Aluminium Alloy AL-P7175-T73511 Extruded Bar and Section a or D Less Than or Equal to 150 mm Edition P 1《航空系列 铝合金AL-P7175-T73511挤压条和杆剖面直径D小于或等.pdf

AECMA PREN 4294-1998 Aerospace Series Aluminium Alloy AL-P7175-T7354 Die Forgings a Less Than or Equal to 150 mm Edition P 1《航空系列 铝合金AL-P7175-T7354热模锻小于或等于150mm.P1版》.pdf

AECMA PREN 4297-1996 Aerospace Series Nuts Hexagon Self-Locking by Plastic Ring Normal Height Normal Across Flats in Corrosion Resisting Steel Passivated Classification 900 MPa (at.pdf

AECMA PREN 4300-1998 Aerospace Series Identification Marking of Engine Items Design Standard Edition P 1《航空系列 发动机设计打印标号标准.P1版》.pdf

AECMA PREN 4301-1998 Aerospace Series Identification Marking Methods for Engine Items Engineering Requirements Edition P 1《航空系列 发动机打印标号方法工程要求.P1版》.pdf

AECMA PREN 4302-1997 Aerospace Series Open Ring Insert Tool Square Drive Edition P 1《航空系列 环嵌入工具正方形驱动.P1版》.pdf

AECMA PREN 4303-1999 Aerospace Series Sleeves Tubular for Tension Screws with Flush Head in Corrosion Resisting Steel Passivated (0 25 mm Wall Thickness) Edition P 1《航空系列 管状张力螺丝钉和埋.pdf

AECMA PREN 4304-1999 Aerospace Series Sleeves Tubular for Shear Screws with Flush Head in Corrosion Resisting Steel Passivated (0 25 mm Wall Thickness) Edition P 1《航空系列 管状埋头螺丝钉抗腐蚀钢.pdf

AECMA PREN 4306-1999 Aerospace Series Sleeves Tubular for Tension Screws with Flush Head in Corrosion Resisting Steel Passivated (0 50 mm Wall Thickness) Edition P 1《航空系列 管状埋头螺丝钉抗腐.pdf