NBN G 62-006-1975 7500 《纺织 染料的坚固性测试 染池里的金属环境中的坚固性》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 22007-4-2012 en Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4 Laser flash method《塑料 导热系数和热扩散系数的测定 第4部分 激光闪光法》.pdf

EN ISO 22007-4-2017 en Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4 Laser flash method.pdf

EN ISO 22007-6-2015 en Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6 Comparative method for low thermal conductivities using a temperature-modul.pdf

EN ISO 22030-2011 en Soil quality - Biological methods - Chronic toxicity in higher plants《土质 生物方法 高等植物的慢性毒性》.pdf

EN ISO 22032-2009 en Water quality - Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge - Method using extraction and gas chromatography mass sp.pdf

EN ISO 22068-2013 en Sintered-metal injection-moulded materials - Specifications《烧结金属粉末注射成型材料 规格》.pdf

EN ISO 22088-1-2006 en Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 1 General guidance《塑料 测定耐环境应力破裂性(ESC) 第1部分 通用指南 ISO 22088-1-2006》.pdf

EN ISO 22088-2-2006 en Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 2 Constant tensile load method《塑料 测定耐环境应力破裂性(ESC) 第2部分 恒定拉伸负荷法 ISO 22088.pdf

EN ISO 22088-3-2006 en Plastics Determination of resistance to environmental stress cracking (ESC) Part 3 Bent strip method《塑料制品 耐环境应力开裂(ESC)的测定 第3部分 弯带法 ISO 22088-3-2006 -1996》.pdf