NBN H 03-322-1987 6250 《包装 完整的满的发送包装，压缩测试机帮助之下的堆叠测试》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 10456-1980 Plastics Method for determination of incandescence resistance《塑料 塑料同赤热杆接触时耐热灼性能测定法》.pdf

GOST 10457-1973 Auxiliary compounds for textiles Glycasine Specifications《纺织品用辅助混合物 糖苷 规范》.pdf

GOST 10458-1981 Transformers for induction electrothermal installations for frequency from 500 to 10000Hz Basic parameters《感应电加热装置用频率 110Hz～1000Hz的变压器 基本参数》.pdf

GOST 10459-1987 Gummed tape base paper Specifications《胶带纸 规范》.pdf

GOST 10460-1972 Horizontal copy-milling machines Basic dimensions《卧式仿形铣床 基本尺寸》.pdf

GOST 10461-1981 Shake-proof washers with teeth General specifications《带牙防震垫圈 通用规范》.pdf

GOST 10462-1981 Shake-proof washers with inside teeth Construction and dimensions《带内齿的止动垫圈 结构及尺寸》.pdf

GOST 10463-1981 Shake-proof washers with outside teeth Construction and dimensions《带外齿的止动垫圈 结构及尺寸》.pdf

GOST 10464-1981 Shake-proof washers with outside teeth for screws with countersunk and raised countersunk head of 90 angle Construction and dimensions《90埋头及半埋头螺钉用带齿止动垫圈 结构及尺寸》.pdf