NBN I 09-001-1978 8750 《钢管的传统作业脚手架 一般条件和测试》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSE-M1A309-A2-2011 PISTON RING ALLOY STEEL COMPRESSION TO BE USED WITH FORD WSS-M99P1111-A 《活塞环 合金钢 压缩 与福特WSS-M99P1111-A 一起使用 在福特WSE-M1A303-A1中显示》.pdf

FORD WSE-M1A32-B1-2011 GREY CAST IRON - METALLURGICAL STRUCTURE OF CYLINDER BLOCKS AND HEADS TO BE USED WITH FORD WSS-M99P1111-A 《灰口铸铁 汽缸体和头的冶金结构 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSE-M1A32-B2-2011 GREY CAST IRON - METALLURGICAL STRUCTURE OF CYLINDER BLOCKS AND HEADS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSE-M1A32-B1)《灰口铸铁 汽缸体和头的冶金结构 与福特.pdf

FORD WSE-M1A320-A1-2011 GRAY CAST IRON CYLINDER LINERS THIN WALL TO BE USED WITH FORD WSS-M99P1111-A 《灰口铸铁 汽缸套 薄壁 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSE-M1A320-A2-2011 GRAY CAST IRON CYLINDER LINERS (10 mm or thicker) TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSE-M1A320-A1)《灰口铸铁 汽缸套 (10 mm或更厚) 与福特WSS-M99P1111-A.pdf

FORD WSE-M1A320-A3-2002 GRAY CAST IRON CYLINDER LINERS TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSE-M1A320-A1)《灰口铸铁气缸衬筒 与标准FORD WSS-M99P1111-A一起使用 列于标准WSE-M1A320-A1上》.pdf

FORD WSE-M1A320-A4-2002 GRAY CAST IRON CYLINDER LINERS HIGH DURABILITY TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSE-M1A320-A1)《高耐久性灰口铸铁气缸衬筒 与标准FORD WSS-M99P1111-A一起使用 列于标准.pdf

FORD WSE-M1A320-A5-2017 GRAY CAST IRON CYLINDER LINERS ROUGH CAST OUTSIDE DIAMETER TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSE-M1A320-A3).pdf

FORD WSE-M1A321-A1-2002 LAMINATED SOUND VIBRATION STEEL SHEET TO BE USED WITH FORD WSS-M99P1111-A 《隔声 隔振分层钢板 与标准FORD WSS-M99P1111-A一起使用 》.pdf