NBN I-988-1969 9375 《砂浆和混凝土的聚合物 表面密度的测量》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D823-A-2006 POLYAMIDE 66 (PA66) HEAT STABILIZED 40% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《具有热稳定性的聚酰胺66(PA66) 40%玻璃纤维 矿物强.pdf

FORD WSK-M4D827-A-2011 ABS MOLDING COMPOUND HIGH HEAT RESISTANT HIGH IMPACT LOW GLOSS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部耐高温有耐冲击强度的低光泽度丙烯腈模塑材料 与福特WSS-M99P1111-A 一起.pdf

FORD WSK-M4D827-A2-2009 ABS MOLDING COMPOUND HIGH HEAT RESISTANT HIGH IMPACT LOW GLOSS INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用低光亮耐高温、高抗冲丙烯腈-丁二烯-苯乙烯共聚物(ABS)成型料 与标准FOR.pdf

FORD WSK-M4D829-A-2006 POLYAMIDE 12 (PA12) HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定、30%玻璃纤维增强的聚酰胺12成型料 与标准FORD WSS-M.pdf

FORD WSK-M4D830-A-2010 POLYETHYLENE TEREPHTALATE (PET) FILM TRANSPARENT TO BE USED WITH FORD WSS-M99P1111-A 《透明聚对苯二甲酸乙二酯（PET）薄膜 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D836-A-2012 ABS HIGH HEAT ELECTROPLATING GRADE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D837-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT) 20% GLASS SPHERE FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《20%玻璃珠填充的聚对苯二甲酸丁二醇酯（PBT）成型料 与标准FORD WSS-M99.pdf

FORD WSK-M4D838-A-2006 POLYETHERETHERKETONE (PEEK) SELF-EXTINGUISHING (SE) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚醚醚酮（PEEK）自熄灭型（SE）成型料 与标准FORD WSS-M99P1111-A一起使用》.pdf

FORD WSK-M4D839-A-2006 ACETAL (POM) COPOLYMER ELASTOMER MODIFIED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用乙缩醛共聚物（POM）弹性体改性成型料 与标准FORD WSS-M99P1111-A一起使.pdf