NBN T 03-342-1981 9375 Boric oxide for industrial use - Determination of boric oxide content - Volumetric method《工业用氧化硼，氧化硼含量的测定 容积法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D4742-2017 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)《利用薄膜耗氧量(TFOUT)测定车用汽油发动机油氧化稳定性的标准试验方法》.pdf

ASTM D4745-2006 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials《聚四氟乙烯(PTFE)模塑和挤压材料的填充化合物标准规范》.pdf

ASTM D4745-2008 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials《聚四氟乙烯模压和挤压料填充化合物的标准规范》.pdf

ASTM D4745-2011 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials《聚四氟乙烯模塑和挤压材料的填充化合物的标准规范》.pdf

ASTM D4745-2011a Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials《聚四氟乙烯模压和挤压料填充化合物的标准规格》.pdf

ASTM D4745-2011ae1 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials《聚四氟乙烯(PTFE)模压和挤压料填充化合物的标准规格》.pdf

ASTM D4745-2014 Standard Classification System and Basis for Specification&13 for Filled Polytetrafluoroethlyene &40 PTFE&41 Molding and Extrusion Materials Using ASTM Methods《使用AS.pdf

ASTM D4746-1998(2003)e1 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration《用加压过滤法测定焦油和硬沥青中喹啉不溶物含量的标准试验方法》.pdf

ASTM D4746-1998(2008) Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration《用加压过滤法测定焦油和硬沥青中喹啉不溶物含量的试验方法》.pdf