NBN T 04-126-1983 3125 Sec-Butyl alcohol for industrial use - List of methods of test《工业用仲丁醇 试验方法列表》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AIA NAS 1530-1973 Pin Swage Locking Aluminum Alloy Protruding Head Tension Pull-Type (Rev 2) R(1989).pdf

AIA NAS 1532-1973 Pin Swage Locking Aluminum Alloy Protruding Head Tension Pull-Type (Rev 2) R(1989).pdf

AIA NAS 1533-1992 (Inactive)Pin 100 Degree Csk Head Hi-Shear Rivet Close Tolerance (Rev 1).pdf

AIA NAS 1534-1993 (Inactive)Primer Coating Low Volatile Organic Compound Chemical and Solvent Resistant (Rev 1).pdf

AIA NAS 1535-1542-1973 Pin Swage Locking Aluminum Alloy 100 Degree Head (MS20426) Tension Pull-Type Rev 2 R(1989).pdf

AIA NAS 1535-1973 Pin Swage Locking Aluminum Alloy 100 Degree Head (MS20426) Tension Pull-Type (Rev 2) R(1989).pdf

AIA NAS 1536-1973 Pin Swage Locking Aluminum Alloy 100 Degree Head (MS20426) Tension Pull-Type (Rev 2) R(1989).pdf

AIA NAS 1538-1973 Pin Swage Locking Aluminum Alloy 100 Degree Head (MS20426) Tension Pull-Type (Rev 2) R(1989).pdf

AIA NAS 154-2002 Bolt-Internal Wrenching-Steel.2500-28 Thru 1.1250-12 FSC 5306 Rev 12.pdf