NBN T 52-053-1977 8750 Determination of the sulphur content of petroleum products by the Wiokbold combustion method《石油产品硫含量的测定 威克波耳德燃烧法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 60294-2012 en Measurement of the dimensions of a cylindrical component with axial terminations.pdf

EN 60296-2012 en Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear.pdf

EN 60297-3-100-2009 en Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482 6 mm (19 in) series - Part 3-100 Basic dimensions of front pa.pdf

EN 60297-3-101-2004 en Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482 6 mm (19 in) series Part 3-101 Subracks and associated plug-i.pdf

EN 60297-3-102-2004 en Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482 6 mm (19 in) series Part 3-102 Injector extractor handle《电子设备.pdf

EN 60297-3-103-2004 en Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482 6 mm (19 in) series Part 3-103 Keying and alignment pin《电子设备用.pdf

EN 60297-3-104-2006 en Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482 6 mm (19 in) series Part 3-104 Connector dependent interface .pdf

EN 60297-3-105-2009 en Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482 6 mm (19 in) series - Part 3-105 Dimensions and design aspect.pdf

EN 60297-3-106-2010 en Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482 6 mm (19 in) series - Part 3-106 Adaptation dimensions for su.pdf