NBN T 63-139-1980 3750 Soaps - Determination of chloride content - Potentiometric method《肥皂 氯化物含量的测定 电位滴定法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M4D147-A-2008 POLYETHYLENE (PE) LINEAR - EXTRUSION GRADE TO BE USED WITH FORD WSS-M99P1111-A 《挤塑级线型聚乙烯（PE） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D148-A-2005 POLYVINYL CHLORIDE (PVC) COPOLYMER HOT DIP PLASTISOL TO BE USED WITH FORD WSS-M99P1111-A 《聚氯乙烯（PVC）共聚物热浸塑料溶胶 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D151-A-2008 POLYETHYLENE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯成型料 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M4D955-A FORD WSS-M4D955-A FORD WSS-M4D.pdf

FORD ESB-M4D152-A-2008 POLYETHYLENE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯成型料 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD ESB-M4D151-A上[使用 FORD WSS-M4D955-A FORD WSS.pdf

FORD ESB-M4D153-A-2008 POLYETHYLENE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯成型料 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD ESB-M4D151-A上[使用 FORD WSS-M4D955-A FORD WSS.pdf

FORD ESB-M4D156-A-2008 POLYETHYLENE (PE) SHEET - BLACK TO BE USED WITH FORD WSS-M99P1111-A 《黑色聚乙烯（PE）板 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D157-A-2008 POLYETHYLENE (PE) SHEET - CLEAR TO BE USED WITH FORD WSS-M99P1111-A 《透明聚乙烯（PE）板 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD ESB-M4D156-A上》.pdf

FORD ESB-M4D169-A2-2009 ACETAL RESIN 15% PTFE FILLED TO BE USED WITH FORD WSS-M99P1111-A 《15%聚四氟乙烯（PTFE）填充的缩醛树脂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M4D175-A-2006 POLYPROPYLENE (PP) MEDIUM IMPACT - MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (USE ESA-M4D190-A)《中等抗冲聚丙烯（PP）成型料 与标准FORD WSS-M99P1111-A一起使用 使用ES.pdf