NBN Z 07-006-1994 3750 Information Technology - Open Systems Interconnection - Allocation and registration of ISO DCC format Network Addresses in Belgium《信息技术 开式系统互联，在比利时的ISO通信数据控制.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M2G359-A-2003 ADHESIVE HOT MELT HOT APPLIED 190 - 220 TO BE USED WITH FORD WSS-M99P1111-A 《190-220℃热涂热熔胶粘剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M2G361-A-2015 ADHESIVE MOISTURE CURE URETHANE WARM APPLIED TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M2G368-A-2015 PRIMER ADHESION PLASTIC TRIM SURFACES INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M2G373-A-2016 ADHESIVE HEM FLANGE ALUMINUM BONDING TWO COMPONENT 150 - 180 MINUTE GEL POINT 70 - 90 GEL POINT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M2G374-A-2015 ADHESIVE WATER DISPERSION STYRENE BUTADIENE (SBR) RUBBER BASE PRESSURE SENSITIVE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M2G382-A-2002 ADHESIVE URETHANE TWO COMPONENT HEAT CURING PLASTIC BONDING TO BE USED WITH FORD WSS-M99P1111-A 《塑性树脂粘合的热固化两组分氨基甲酸酯胶粘剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M2G383-A1-2014 TAPE ADHESIVE EPOXY BASED STRUCTURAL LOW-EXPANDING HIGH TEMPERATURE HEAT CURING WELDABLE FLOW WASH RESISTANT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M2G383-A1-2016 TAPE ADHESIVE EPOXY BASED STRUCTURAL LOW-EXPANDING HIGH TEMPERATURE HEAT CURING WELDABLE FLOW WASH RESISTANT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M2G383-A2-2014 TAPE ADHESIVE EPOXY BASED STRUCTURAL MEDIUM-EXPANDING HIGH TEMPERATURE HEAT CURING WELDABLE FLOW WASH RESISTANT TO BE USED WITH FORD WSS-M99P1111-A (Shown.pdf