NBN-EN 21680-1-1992 2500 《声音 测量电动旋转机发出响声的实验规则 第1部分：在开阔空间里反射面上实施的鉴定方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 13772-1986 Cylindrical helical compression (tension) springs of II class and 3 category made of round steel Main parameters of coils《3等2级圆柱形螺旋压缩和拉伸圆钢弹簧 螺旋圈基本参数》.pdf

GOST 13773-1986 Cylindrical helical compression springs of II class and of 4 category made of round steel Main parameters of coils《圆钢制圆柱形II级4类螺旋压力(张力)弹簧 卷材主要参数》.pdf

GOST 13774-1986 Cylindrical helical compression springs of III class and of 1 category made of round steel Main parameters of coils《圆钢制圆柱形III级1类螺旋压力(张力)弹簧 卷材主要参数》.pdf

GOST 13775-1986 Cylindrical helical compression springs of III class and of 2 category made of round steel Main parameters of coils《2等3级圆柱形螺旋压缩和拉伸圆钢弹簧 螺旋圈基本参数》.pdf

GOST 13776-1986 Cylindrical helical compression springs of III class and of 3 category made of round steel Main parameters of coils《圆钢制圆柱形III级3类螺旋压力(张力)弹簧 卷材主要参数》.pdf

GOST 13779-1977 Cylindrical reamers Allowances on diameters《圆柱铰刀 尺寸容差》.pdf

GOST 13781 0-1986 Power cable couplings for tension up to 35 kV including General technical requirements《35kV及以下电压电力电缆连接器 一般技术要求》.pdf

GOST 13781 2-1977 Lead joints for 1 6 and 10 kV power cables Complete set of details and mounting materials Specifications《电压1 6kV和10kV电力电缆用的铝连接套管 技术条件》.pdf

GOST 13782-1968 General-purpose spring dynamometers Methods and means of verification《通用弹簧式测力计 检定方法与工具》.pdf