NBN-EN 22605-3-1992 6875 《压力用途的钢 高温特性的推导和验证 第3部分：在限定数据时，推导高温屈服应力或弹性极限应力特性可供选择的》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 15333-2-2009 Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Free flow apparatus《呼吸设备 配备的开路脐带式压缩气体驱动装置 自由流动装置 n》.pdf

BS EN 15334-2007 Sanitary appliances - Methacrylic dispersions of high filler content《卫生设备 高填料含量的甲基丙烯酸分散体》.pdf

BS EN 15335-2007 Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2000 C《高级工业陶瓷 陶瓷复合材料 2000℃共振光束法测定弹性特性》.pdf

BS EN 15336-2007 Adhesives - Determination of the time to rupture of bonded joints under static load《粘合剂 静负荷状态下胶粘件断裂时间的测定》.pdf

BS EN 15337-2007 Adhesives - Determination of shear of anaerobic adhesives using pin-and-collar specimens《粘合剂 用针-环试件测定厌氧胶粘剂的剪切强度》.pdf

BS EN 15339-2-2007 Thermal spraying - Safety requirements for thermal spraying equipment - Gas control units《热喷涂 热喷涂设备的安全要求 气体控制部件》.pdf

BS EN 15340-2007 Thermal spraying - Determination of shear load resistance of thermally sprayed coatings《热喷涂 热喷涂层耐剪切负荷的测定》.pdf

BS EN 15341-2007 Maintenance - Maintenance key performance indicators《维修 维修关键性能指示器》.pdf

BS EN 15342-2007 Plastics - Recycled plastics - Characterization of polystyrene (PS) recyclates《塑料 再生塑料 聚苯乙烯(PS)回收再生材料的特性》.pdf