NBN-EN 24035-1992 7500 《六角矮螺母（削过边） 等级A和B》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AIA NA 0165-1989 (Inactive)Post Electrical- Mechanical Equipment Swage Type Metric (Rev 2) (See NA 0213).pdf

AIA NA 0166-0167-1991 (Inactive)Insert Molded-in CSK Clearance Hole Sandwich Panel Al Alloy and CRES Metric (Superseded - October 1991 Use NA 0235 and NA 0236 for Description of St.pdf

AIA NA 0166-1991 (Inactive)Insert Molded-in CSK Clearance Hole Sandwich Panel Al Alloy and CRES Metric (Superseded - October 1991 Use NA 0235 and NA 0236 for Description of Status .pdf

AIA NA 0167-1991 (Inactive)Insert Molded-in CSK Clearance Hole Sandwich Panel Al Alloy and CRES Metric (Superseded - October 1991 Use NA 0235 and NA 0236 for Description of Status .pdf

AIA NA 0168-0169-1991 (Inactive)Insert Molded-in Thru Clearance Hole Sandwich Panel Al Alloy and CRES Metric (Superseded- October 1991 Use NA0237 and NA0238 for Description of Stat.pdf

AIA NA 0168-1991 (Inactive)Insert Molded-in Thru Clearance Hole Sandwich Panel Al Alloy and CRES Metric (Superseded- October 1991 Use NA0237 and NA0238 for Description of Status No.pdf

AIA NA 0169-1991 (Inactive)Insert Molded-in Thru Clearance Hole Sandwich Panel Al Alloy and CRES Metric (Superseded- October 1991 Use NA0237 and NA0238 for Description Of Status No.pdf

AIA NA 0174-1988 Design Parameters for Head Form of Solid Rivets and 100 Degree Reduced Head for Bolts Metric (Rev 1).pdf

AIA NA 0175-0177-1984 Spacer Sleeve-Non Metallic Screw and Bolt Metric.pdf