NBN-EN 24766-1992 5625 《有裂纹的没有球形末端的螺钉》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST R 8 744-2011 State system for ensuring the uniformity of measurements Optics and photonics Interferometric measurement of optical elements and optical systems Part 3 Calibratiipme.pdf

GOST R 8 745-2011 State system for ensuring the uniformity of measurements Optics and photonics Interferometric measurement of optical elements and optical systems Part 2 Measureme.pdf

GOST R 8 746-2011 State system for ensuring the uniformity of measurements State verification schedule for instruments measuring the ratio error and phase displacement of a c powero 75.pdf

GOST R 8 747-2011 State system for ensuring the uniformity of measurements Metals and alloys Vickers hardness test Part 3 Calibration of reference block《国家测量一致性保证体系 金属和合金 维氏硬度试验 标准.pdf

GOST R 8 748-2011 State system for ensuring the uniformity of measurements Metallic materials Instrumented indentation test for hardness and materials parameters Part 1 Test method.pdf

GOST R 8 749-2011 State system for ensuring the uniformity of measurements Light-emitting diodes Methods of photometric measurements《国家测量一致性保证体系 LED 光度测量方法》.pdf

GOST R 8 750-2011 State system for ensuring the uniformity of measurements State verification schedule for coordinate-temporal measurements means《国家测量一致性保证体系 坐标时间测量工具的国家检定计划》.pdf

GOST R 8 751-2011 State system for ensuring the uniformity of measurements Measurement microphones Part 7 Values for difference between free-field and pressure sensitivity levels o.pdf

GOST R 8 752-2011 State system for ensuring the uniformity of measurements State verification schedule for means measuring torque of force《国家测量一致性保证体系 扭矩力测量方法的国家检定计划》.pdf