NBN-EN 259-1993 1875 Wall coverings in roll form Specification for heavy duty wall coverings《卷式墙面饰层 大量使用的墙面饰层说明》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6770-2007(2011) 5625 Standard Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method)《纺织网的抗磨损性的标准试验方法(六角钢条方法)》.pdf

ASTM D6770-2007(2015) 4436 Standard Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method)《纺织织带耐磨性的标准试验方法 (六角钢条法)》.pdf

ASTM D6771-2018 9375 Standard Practice for Low-Flow Purging and Sampling for Wells and Devices Used for Ground-Water Quality Investigations.pdf

ASTM D6772 D6772M-2015 red 3583 Standard Test Method for Dimensional Stability of Sandwich Core Materials《夹层芯部材料尺寸稳定性的标准试验方法》.pdf

ASTM D6772 D6772M-2016 4756 Standard Test Method for Dimensional Stability of Sandwich Core Materials《夹层芯材尺寸稳定性的标准试验方法》.pdf

ASTM D6772-2002(2007) Standard Test Method for Dimensional Stability of Sandwich Core Materials《夹层芯部材料尺寸稳定性的标准试验方法》.pdf

ASTM D6773-2002 Standard Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester《利用锌基轴承环剪切试验机进行标准的剪切试验方法》.pdf

ASTM D6773-2008 923 Standard Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester《利用锌基轴承环剪切试验机进行标准的剪切试验方法》.pdf

ASTM D6773-2016 8511 Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester《利用舒尔茨环剪切试验机对堆积固体的标准试验方法》.pdf