NBN-EN 26501-1992 3125 《镍铁 送货说明和条件（ISO 6501：1988）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C1133-2003 Standard Test Method for Nondestructive Assay of Special Nuclear Material in Low Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning《分段无源γ射线扫描法对低密度废料及残渣.pdf

ASTM C1134-1990(2001) Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion《部分浸入后刚性热绝缘材料水分保持标准试验方法》.pdf

ASTM C1134-1990(2007) Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion《刚性绝热层在部分浸泡后的水分保持能力的标准试验方法》.pdf

ASTM C1134-1990(2007)e1 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion《部分浸入后刚性热绝缘材料水分保持标准试验方法》.pdf

ASTM C1134-1990(2012)e1 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion《部分浸入后刚性热绝缘材料水分保持的标准试验方法》.pdf

ASTM C1134-2017 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion《刚性绝热材料部分浸渍后保水性的标准试验方法》.pdf

ASTM C1135-2000(2005) Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants《测定结构密封件的粘着抗拉强度特性的标准试验方法》.pdf

ASTM C1135-2000(2011) Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants《测定结构密封件的粘着抗拉强度特性的标准试验方法》.pdf

ASTM C1135-2015 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants《测定结构密封料的粘着抗拉强度特性的标准试验方法》.pdf