NBN-EN 27627-5-1993 5625 Hardmetals Chemical analysis by flame atomic absorption spectrometry Part 5 Determination of cobalt iron manganese molybdenum nickel titanium and vanadium 1.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D1200-2010(2014) Standard Test Method for Viscosity by Ford Viscosity Cup《采用福特粘度杯的粘度标准试验方法》.pdf

ASTM D1201-1999(2004) Standard Specification for Thermosetting Polyester Molding Compounds《热固聚酯模制化合物的标准规范》.pdf

ASTM D1201-1999(2012) Standard Specification for Thermosetting Polyester Molding Compounds《热固聚酯模制化合物的标准规格》.pdf

ASTM D1201-2013 Standard Specification for Thermosetting Polyester Molding Compounds《热固聚酯模制化合物的标准规格》.pdf

ASTM D1203-1994(2003) Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods《用活性碳法测定塑料的挥发损失的标准试验方法》.pdf

ASTM D1203-2010 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods《用活性碳法测定塑料的挥发损失的标准试验方法》.pdf

ASTM D1203-2016 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods《采用活性炭法测定塑料挥发性损失的标准试验方法》.pdf

ASTM D1204-2007 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature《升温非硬性热塑塑料薄板或薄膜线性尺寸变化的标准试验方法》.pdf

ASTM D1204-2008 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature《高温点非刚硬性热塑料板或薄膜线性尺寸变化的标准试验方法》.pdf