NBN-EN 28872-1993 8750 Aluminium caps for transfusion infusion and injection bottles General requirements and test methods (ISO 8872 1988)《输血，输液及注射瓶的铝盖 一般要求和试验方法（ISO 8872：1988）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D1042-2006 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions《加速操作状态下塑料线性尺寸变化的标准试验方法》.pdf

ASTM D1042-2012 Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture《暴露于热湿条件下塑料线性尺寸变化的标准试验方法》.pdf

ASTM D1042-2012(2017) Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture《热量和湿气暴露导致塑料线性尺寸变化的标准试验方法》.pdf

ASTM D1043-2002 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test《用扭转试验法测定温度对塑料强度变化的标准试验方法》.pdf

ASTM D1043-2009 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test《扭转试验法测定温度对塑料强度变化的标准试验方法》.pdf

ASTM D1043-2010 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test《通过抗扭试验测定随温度变化的塑料的刚度特性的标准试验方法》.pdf

ASTM D1043-2016 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test《用扭转试验法测定作为温度功能的塑料刚度性能的标准试验方法》.pdf

ASTM D1044-2005 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion《透明塑料软片表面耐摩擦性的标准试验方法》.pdf

ASTM D1044-2008 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion《透明塑料表面耐磨蚀性的标准试验方法》.pdf