NBN-EN 29454-1-1994 1875 Soft soldering fluxes Classification and requiremnets Part 1 Classification labelling and packaging (ISO 9454-1 1990)《软钎焊剂 分类和要求 第1部分：分类，标签和包装（ISO 9454：1：1.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D976-A-2003 POLYAMIDE 6 + POLYPROPYLENE BLEND (PA6 + PP) 8% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《8%玻璃纤维增强的聚酰胺6 +聚丙烯(PP)混合物(PA6+.pdf

FORD WSS-M4D977-A-2006 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) 10% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚苯醚+聚酰胺混合物(PPE+PA)制10%玻璃纤维.pdf

FORD WSS-M4D977-A2-2006 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M4D977-A)《聚.pdf

FORD WSS-M4D979-A-2013 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND UNPAINTED AIRBAG COVER.pdf

FORD WSS-M4D979-B2-2013 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND UNPAINTED STEERING WHEEL SIDE AIRBAG COVER TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D979-B2-2017 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND UNPAINTED STEERING WHEEL SIDE AIRBAG COVER TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D979-B3-2013 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND UNPAINTED KNEE AIRBAG COVER TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4D979-B2).pdf

FORD WSS-M4D979-B3-2017 THERMOPLASTIC ELASTOMERIC MOLDING COMPOUND UNPAINTED KNEE AIRBAG COVER TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4D979-B2).pdf

FORD WSS-M4D980-A-2006 FLEXIBLE COVERSTOCK EXTRUDED THERMOPLASTIC POLYOLEFIN (TPO) INSTRUMENT PANEL TO BE USED WITH FORD WSS-M99P1111-A 《仪表盘用挤塑热塑性聚烯烃（TPO）柔性护套 与标准FORD WSS-M99P1.pdf