NBN-EN 302-3-1994 3750 《承重木结构用胶粘剂 试验方法 第3部分：通过温度和湿度循环试验测定木纤维酸性腐蚀对横向拉伸强度的影响》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 6577-1992 民机机舱内部非金属材料烟密度试验方法.pdf

HB 6578-1992 铝、镁合金铸件检验用标准参考射线底片（不提供底片）.pdf

HB 658-1979 粗齿锥柄立铣刀D=14~50mm.pdf

HB 6585-1992 普通螺纹滚制前毛坯直径.pdf

HB 6586-1992 螺栓螺纹拧紧力矩.pdf

HB 6587-1992 锤上自由锻件机械加工余量与尺寸公差.pdf

HB 6588-1992 航空工业档案主题标引规则.pdf

HB 6589-1992 切削加工工艺用代号与符号.pdf

HB 659-1979 细齿锥柄立铣刀D=14~50mm.pdf