NBN-EN 3284-1994 3125 Aerospace series - Bearings airframe rolling - Rigid single row ball bearings in steel - Diameter series 0 and 2 - Normal clearance category - Dimensions and .pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 2249-3-2008 Geometrical product specifications (GPS) - NOT GO gauging members - Part 3 Segmental cylindrical gauging members for holes over 120 mm up to 200 mm nominal diamet.pdf

DIN 2249-4-2008 Geometrical product specifications (GPS) - NOT GO gauging members - Part 4 Cylindrical gauging members for holes over 40 mm up to 120 mm nominal diameter《产品几何量技术规.pdf

DIN 2250-1-2008 Geometrical product specifications (GPS) - GO ring gauges and setting ring gauges - Part 1 From 1 mm up to 315 mm nominal diameter《产品几何量技术规范(GPS) 过端环规和定位环规 第1部分 1mm.pdf

DIN 2253-2006 Geometrical product specifications (GPS) - Reference gauges for gap gauges from 1 mm to 315 mm nominal size《产品几何量技术规范(GPS) 1mm～315mm标称尺寸厚度基准量规》.pdf

DIN 2254-1-1995 Verification of geometrical parameters - NOT GO ring gauges - Part 1 Nominal diameter from 1 mm up to 315 mm general purpose《几何参数的鉴定 不过端环规 第1部分 公称直径范围为 1 mm - 315 m.pdf

DIN 2258-1986 Graphical symbols for dimensional metrology《尺寸计量的图形符号》.pdf

DIN 2259-2008 Geometrical product specifications (GPS) - Gauges for cylindrical fits and fits of plan surfaces - Survey inscription marking《产品几何量技术规范(GPS) 圆柱形和平面配合量规 概述、特征、和标记》.pdf

DIN 2269-1998 Verification of geometrical parameters - Cylindrical measuring pin《几何参数的验证 圆柱形测量销钉》.pdf

DIN 2270-2017 Geometrical product specifications (GPS) - Dial test indicators (lever type) - Maximum permissible errors《产品几何技术规范(GPS) 刻度盘测试指示器(杠杆式) 最大允许误差》.pdf