NBN-ISO 1432-1990 1875 Rubber vulcanized or thermoplastic - Determination of low temperature stiffening (Gehman test)《硫化热塑性橡胶，低温硬化的测定方法（杰曼试验）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN ISO 18081-2016 Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission (ISO 18081 2016) German version EN ISO 18081 2016《无损试验.pdf

DIN EN ISO 18103-2015 Superfine woven wool fabric labelling - Requirements for Super S code definition (ISO 18103 2015) German version EN ISO 18103 2015《超细编织羊毛织物标签 超级S代码定义要求 (ISO 1.pdf

DIN EN ISO 18104-2014 Health informatics - Categorial structures for representation of nursing diagnoses and nursing actions in terminological systems (ISO 18104 2014) English vers.pdf

DIN EN ISO 18113-1-2013 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1 Terms definitions and general requirements (ISO 18113-1 .pdf

DIN EN ISO 18113-2-2013 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 2 In vitro diagnostic reagents for professional use (ISO 1.pdf

DIN EN ISO 18113-3-2013 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 3 In vitro diagnostic instruments for professional use (IS.pdf

DIN EN ISO 18113-4-2013 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 4 In vitro diagnostic reagents for self-testing (ISO 18113.pdf

DIN EN ISO 18113-5-2013 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 5 In vitro diagnostic instruments for self-testing (ISO 18.pdf

DIN EN ISO 18122-2016 Solid biofuels - Determination of ash content (ISO 18122 2015) German version EN ISO 18122 2015《固体生物燃料 灰分含量的测定(ISO 18122-2015) 德文版本EN ISO 18122-2015》.pdf