NC 00-08-1967 Sampling of liquids《液体采样》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D873-A4-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 20% MINERAL FILLED LOW THERMAL EXPANSION HIGH IMPACT MOLDING COMPOUND PAINTABLE TO BE USED WITH FORD WSS-M99P1111-.pdf

FORD WSS-M4D873-B1-2013 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 15% MINERAL FILLED MOLDING COMPOUND MOLD-IN-COLOR EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D873-B1-2017 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 15% MINERAL FILLED MOLDING COMPOUND MOLD-IN-COLOR EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D873-B2-2013 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 15% MINERAL FILLED MOLDING COMPOUND PAINTABLE OVER GRAIN EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on F.pdf

FORD WSS-M4D873-B2-2017 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 15% MINERAL FILLED MOLDING COMPOUND PAINTABLE EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4D.pdf

FORD WSS-M4D873-B3-2011 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 20% MINERAL FILLED HIGH IMPACT LOW CLTE MOLDING COMPOUND MOLD-IN-COLOR ONLY EXTERIOR TO BE USED WITH FORD WSS-M99P.pdf

FORD WSS-M4D873-B6-2017 THERMOPLASTIC POLYOLEFIN ELASTOMER 15% MINERAL FILLED HIGH IMPACT LOW CLTE MOLDING COMPOUND FULLY PAINTED ONLY EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A.pdf

FORD WSS-M4D879-A3-2010 POLYCARBONATE + POLYETHYLENE TEREPHTHALATE BLEND (PC + PET) MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《外部聚碳酸酯+聚乙烯对苯二甲酸酯混合物(PC + PET)模塑.pdf

FORD WSS-M4D879-B2-2015 POLYCARBONATE + POLYETHYLENE TEREPHTHALATE BLEND (PC + PET) FULLY PAINTED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf