NC 09-04-96-1988 Unified Elements System of Moulds Dies Stampers and Machining Devices Machining Device Locating Pins Design Specifications《模具统一原理系统 冲模，压模和机械装置 机械装置 定位销设计规格》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 923-2009 六角盖形螺母.pdf

GB T 93-1987 标准型弹簧垫圈.pdf

GB T 934-2008 高温作业环境气象条件测定方法.pdf

GB T 936-2008 彩色显示器白平衡点色坐标及其宽容度.pdf

GB T 94.1-2008 弹性垫圈技术条件.弹簧垫圈.pdf

GB T 94.2-1987 弹性垫圈技术条件 齿形、锯齿锁紧垫圈.pdf

GB T 944.1-1985 螺钉用十字槽.pdf

GB T 946-1988 开槽球面圆柱头轴位螺钉.pdf

GB T 947-1988 开槽球面大圆柱头螺钉.pdf