NC 19-02-19-1984 Working Hyglene and Safety Standards System Steel Bottles for Pressurized Gases General Safety Requirements《工作卫生和安全标准系统 高压气钢瓶 一般安全要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN ISO 16827-2014 Non-destructive testing Ultrasonic testing Characterization and sizing of discontinuities《无损检测 超声波检测 不连续性的特性和尺寸》.pdf

BS EN ISO 16828-2014 Non-destructive testing Ultrasonic testing Time-of-flight diffraction technique as a method for detection and sizing of discontinuities《无损检测 超声波检测 作为不连续检测和评价方法.pdf

BS EN ISO 16834-2012 Welding consumables Wire electrodes wires rods and deposits for gas shielded arc welding of high strength steels Classification《焊接消耗品 高强度钢的气体保护电弧焊用焊丝电极 焊丝 焊条和沉.pdf

BS EN ISO 16841-2014 Steel wire ropes Pulling eyes for rope installation Types and minimum requirements《钢丝绳 绳索安装的拉孔 类型和最低要求》.pdf

BS EN ISO 16851-2013 Textile conveyor belts Determination of the net length of an endless (spliced) conveyor belt《织物输送带 环式(拼接)输送带的净长度测定》.pdf

BS EN ISO 16852-2016 Flame arresters Performance requirements test methods and limits for use《灭火器 使用限制 试验方法和性能要求》.pdf

BS EN ISO 16859-1-2015 Metallic materials Leeb hardness test Test method《金属材料 里氏硬度试验 试验方法》.pdf

BS EN ISO 16859-2-2015 Metallic materials Leeb hardness test Verification and calibration of the testing devices《金属材料 里氏硬度试验 试验装置的验证和校准》.pdf

BS EN ISO 16859-3-2015 Metallic materials Leeb hardness test Calibration of reference test blocks《金属材料 里氏硬度试验 标准硬度块的标定》.pdf