NC 19-02-50-1986 Occupational Hygiene and Safety Standards System Cranes Requireraonts for Hydraulio Equipment and Faoilities《职业卫生和安全标准系统 起重机》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 14187-8-2017 Cold applied joint sealants Test methods Determination of the artificial weathering by UV-irradiation《冷用密封胶 试验方法 用紫外线照射法进行人工风化测定》.pdf

BS EN 14187-9-2006 Cold applied joint sealants - Test methods - Function testing of joint sealants《冷用密封胶 试验办法 接缝密封胶的功能测试》.pdf

BS EN 14188-1-2004 Joint fillers and sealants - Specifications for hot applied sealants《填缝料和密封剂 热用密封剂的规范》.pdf

BS EN 14188-2-2004 Joint fillers and sealants - Part 2 Specifications for cold applied sealants《填缝料和密封剂 冷用密封剂的规范》.pdf

BS EN 14188-3-2006 Joint fillers and sealants - Specification for preformed joint seals《接缝填充物和密封胶 预成型的接缝密封件规范》.pdf

BS EN 14188-4-2009 Joint fillers and sealants - Part 4 Specifications for primers to be used with joint sealants《接缝填充物和密封胶 第4部分 与接缝密封胶一起使用的涂底剂规格》.pdf

BS EN 14190-2014 Gypsum board products from reprocessing Definitions requirements and test methods《再处理的石膏板产品 定义 要求和试验方法》.pdf

BS EN 14195-2014 Metal framing components for gypsum board systems Definitions requirements and test methods《石膏板系统用金属框架元件 定义、要求和试验方法》.pdf

BS EN 14196-2016 Geosynthetics Test methods for measuring mass per unit area of clay geosynthetic barriers《土工合成物 粘土土工合成隔板单位面积质量测量的试验方法》.pdf