NC 54-80-1985 Construotion Materials and Products Asphalt Sampling《建筑材料和产品 沥青抽样》.pdf

相关资源

JIS A1324-1995 建筑材料中水蒸发及渗透的测量方法.pdf

JIS A1325-1995 建筑材料的热膨胀系数的测量方法.pdf

JIS A1451-2007 建筑材料及建筑构件的磨耗试验方法 (采用回转圆盘磨擦与冲击地板材料的磨耗试验方法).pdf

JIS A1452-1972 建筑材料及建筑构件的磨耗试验方法(落砂法).pdf

JIS A1415-1999 聚合物建筑材料暴露于试验室光源的方法.pdf

JIS A1470-1-2008 建筑材料的水蒸气吸附∕解吸性能的测定.第1部分：湿度变化效应.pdf

JIS A1481-2006 建筑材料产品的石棉测定.pdf

JIS A1470-2-2008 建筑材料的水蒸气吸附∕解吸性能的测定.第2部分：温度效应.pdf

JIS A1453-1973 建筑材料及建筑构件的磨耗试验方法(砂纸法).pdf

DL T 5388-2007 水电水利工程天然建筑材料勘察规程.pdf

猜你喜欢

FORD WSS-M4D906-B2-2012 ACRYLONITRILE BUTADIENE STYRENE (ABS) EXTRUSION MOLDING COMPOUND MEDIUM HEAT RESISTANT EXTERIOR PAINTED APPLICATIONS ONLY TO BE USED WITH FORD WSS-M99P1111.pdf

FORD WSS-M4D908-A2-2006 ACRYLONITRILE BUTADIENE STYRENE (ABS) HEAT RESISTANT POST CONSUMER RECYCLATE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M4D908-A)《.pdf

FORD WSS-M4D911-B-2011 POLYPROPYLENE (PP) COPOLYMER HIGH IMPACT 100% RECYCLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《耐冲击100%回收的聚丙烯(PP)共聚物模塑材料 与福特WSS-M99P1111-A 一.pdf

FORD WSS-M4D924-B1-2015 POLYCARBONATE ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) MEDIUM IMPACT MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D924-B2-2016 POLYCARBONATE ACRYLONITRILE BUTADIENE POLYCARBONATE ACRYLONITRILE BUTADIENE MOLDING COMPOUND INTERIOR ANTI-SQUEAK TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D926-A2-2010 POLYCARBONATE (PC) IMPACT MODIFIED 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《冲击改良25%最低回收成分的聚碳酸酯(PC)模塑材料 与福特WSS-M.pdf

FORD WSS-M4D927-A1-2015 POLYPROPYLENE (PP) HOMOPOLYMER 30% MINERAL FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D928-A2-2010 POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC+PBT) MODIFIED MOLDING COMPOUND RECYCLATE 25% MINIMUM RECYCLED CONTENT TO BE USED WITH FORD WSS-M99P111.pdf

FORD WSS-M4D929-A2-2012 POLYBUTYLENE TEREPHTHALATE (PBT) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf