NC 57-61-1985 Geodesy and Cartography Topographic Maps at 1 2 50 000 1 500 000 and 1 1 000 000 Scales《1：250000，1：500000 和1：1000000比例的测地和地形图》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

KS B ISO 5749-2002 Pliers and nippers－Diagonal cutting nippers－Dimensions and test values《夹扭钳和剪扭钳 斜剪钳 尺寸和试验值》.pdf

KS B ISO 5752-2005 Metal valves for use in flanged pipe systems－Face-to-face and centre-to-face dimensions《法兰连接的管道系统用金属法兰 结构长度和端面至中心的尺寸》.pdf

KS B ISO 5753-2008 Rolling bearings－Radial internal clearance《滚动轴承 径向内间隙》.pdf

KS B ISO 5829-2002 Resistance spot welding－Electrode adaptors female taper 1：10《电阻点焊 内锥度1 10的电极接头》.pdf

KS B ISO 6002-2002 Bolted bonnet steel gate valves《螺栓盖钢制阀门》.pdf

KS B ISO 6014-2012 Earth-moving machinery－Determination of ground speed《土方机械 路面速度的测定》.pdf

KS B ISO 6157-1-2010 Fasteners－Surface discontinuities－Part 1：Bolts screws and studs for general requirements《紧固件 表面缺陷 第1部分 普通螺栓、螺钉和螺柱》.pdf

KS B ISO 6157-2-2010 Fasteners－Surface discontinuities－Part 2：Nuts《紧固件 表面缺陷 第2部分 螺母》.pdf

KS B ISO 6157-3-2010 Fasteners－Surface discontinuities－Part 3：Bolts screws and studs for special requirements《紧固件 表面缺陷 第3部分 特殊螺栓、螺钉和螺柱特殊要求》.pdf