NC 59-07-08-02-1988 National Electrotechnical Vocabulary ParticulqarApplications Industrial Electrothermics General Concepts《国家电工词汇 具体应用 工业电热学 一般概念》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M6J175-A-1997 PRIMER SURFACER 130 C BAKING TEMPERATURE CHIP AND SCRATCH INHIBITING REPAIR PARTS《备件用烘干温度130℃的耐开裂和划痕的中途漆》.pdf

FORD WSS-M6J175-A2-1997 PRIMER SURFACER 130 C BAKING TEMPERATURE CHIP AND SCRATCH INHIBITING FULL BODIES (Shown on WSS-M6J175-A)《烘烤温度为130℃的全车身用耐开裂和划痕的中途漆 列于标准WSS-M6J175-A上》.pdf

FORD WSS-M70J11-A-2011 PAINT POWDER COAT THERMOSETTING EPOXY MODIFIED POLYESTER TO BE USED WITH FORD WSS-M99P1111-A 《粉末喷涂的热固性环氧改良聚酯涂料 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSS-M70J12-A-2005 PAINT POWDERED THERMOSETTING ACRYLIC TO BE USED WITH FORD WSS-M99P1111-A 《热固丙烯酸粉末状油漆 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M70J5-B-2004 PAINT POWDERED THERMOSETTING POLYESTER TO BE USED WITH FORD WSS-M99P1111-A 《热固聚酯粉末状油漆 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M70J5-C1-2017 PAINT POWDERED THERMOSETTNG POLYESTER INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M7C67-A3-2012 RUST PREVENTIVE - HOT MELT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M7C79-B-2011 CAVITY WAX CORROSION PROTECTION AUTOMOTIVE CAVITIES SOLVENT BASED 80% SOLIDS TO BE USED WITH FORD WSS-M99P1111-A 《防腐自动腔体溶剂的80%固体腔体蜡 与福特WSS-M99P1111-A 一起使用.pdf

FORD WSS-M7C79-B2-2015 CAVITY WAX CORROSION PROTECTION AUTOMOTIVE CAVITIES SOLVENT BASED min 40% SOLIDS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M7C79-B).pdf