NC 60-35-1988 Teaching Equipment Mechanical Tools Set Quality Specifications《教学设备 机械工具组 质量规范》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D3363-2005(2011) Standard Test Method for Film Hardness by Pencil Test《铅笔试验法测定涂膜硬度的标准试验方法》.pdf

ASTM D3363-2005(2011)e1 Standard Test Method for Film Hardness by Pencil Test《铅笔试验测定漆膜硬度的标准试验方法》.pdf

ASTM D3363-2005(2011)e2 Standard Test Method for Film Hardness by Pencil Test 《铅笔实验测定漆膜硬度的标准试验方法》.pdf

ASTM D3364-1999(2004) Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications《聚氯乙烯和流变的不稳定热塑性材料流动速率的测试试验方法》.pdf

ASTM D3364-1999(2011) Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications《测定受分子结构影响的聚乙烯(氯乙烯)流率的标准试验方法》.pdf

ASTM D3366-2018 Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale).pdf

ASTM D3367-1998(2004) Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force《在离心力作用下聚氯乙烯树脂的增塑剂吸收作用的试验方法》.pdf

ASTM D3367-2009 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force《在离心力作用下聚氯乙烯树脂的增塑剂吸收作用的试验方法》.pdf

ASTM D3367-2013 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force《在离心力作用下聚氯乙烯树脂的增塑剂吸收作用的标准试验方法》.pdf