NC 66-34-1986 Electronics Siboney 241 Radio Receiver Quality Specifioations《电子学 “Siboney 241”（西柏尼241）收音机 质量规范》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4G328-A3-2014 SEALANT PRE-APPLIED THREAD NON-CURING TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4G328-A1).pdf

FORD WSK-M4G328-A4-2014 SEALANT PRE-APPLIED THREAD NON-CURING TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4G328-A1).pdf

FORD WSK-M4G328-A5-2014 SEALANT PRE-APPLIED THREAD NON-CURING TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4G328-A1).pdf

FORD WSK-M4G328-A6-2014 SEALANT PRE-APPLIED THREAD NON-CURING TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4G328-A1).pdf

FORD WSK-M4G329-A-2014 SEALER CAULKING COMPOUND SOLVENT FREE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4G332-A-2009 SEALER VINYL BODY FILLER GRINDABLE HEAT CURING TO BE USED WITH FORD WSS-M99P1111-A 《热固化可磨削的车身填料用乙烯基密封剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4G334-A-2009 SEALER UNDERBODY COATING PRIMER OVEN CURING TO BE USED WITH FORD WSS-M99P1111-A 《烘箱固化型底漆、车身下部涂层用密封剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4G334-A2-2009 SEALER VINYL HEAT CURING AIRLESS SPRAYABLE SOLVENT RELEASE PRIMER OVEN CURING TO BE USED WITH FORD WSS-M99P1111-A 《底漆进行炉内固化的与溶剂脱离的可进行无气喷涂的热固化乙烯基密封层 与福特WS.pdf

FORD WSK-M4G334-A3-2011 SEALER VINYL HEAT CURING AIRLESS SPRAYABLE SOLVENT RELEASE PRIMER OVEN CURING TO BE USED WITH FORD WSS-M99P1111-A 《底漆进行炉内固化的与溶剂脱离的可进行无气喷涂的热固化乙烯基密封层 与福特WS.pdf