NC 80-77-1988 Fishing Industry Deep Water Fishmeal Quality Specifications《水产捕捞业 深水鱼粉 质量规格》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSF-M4D691-A-2006 POLYAMIDE (PA) 66 35% LONG GLASS FIBER REINFORCED HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSB-M4D678-A)《35%长玻璃纤维增强的受热稳定的聚.pdf

FORD WSF-M4D718-A3-2010 POLYCARBONATE (PC) FILM CLEAR AND TRANSLUCENT TO BE USED WITH FORD WSS-M99P1111-A 《干净且透明的聚碳酸酯(PC)膜 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D1053-A1 福特WSS-M4D1.pdf

FORD WSF-M4D728-A2-2010 STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《苯乙烯 马来酐（SMA）共聚物成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSF-M4D736-A-2010 POLYETHERIMIDE (PEI) 10% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《10%玻璃纤维增强的聚醚酰亚胺（PEI）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSF-M4D737-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT) 30 % GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%玻璃纤维增强的聚对苯二甲酸丁二醇酯(PBT)成型料 与标准FORD WS.pdf

FORD WSF-M4D757-A-2010 POLYCARBONATE (PC) 12 5% TiO2 FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚碳酸酯(PC) 12 5%二氧化钛填充模塑材料 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D10.pdf

FORD WSF-M4D767-A-2010 POLYCARBONATE + THERMOPLASTIC COPOLYESTER BLEND (PC + PCTA) FILM TRANSLUCENT TO BE USED WITH FORD WSS-M99P1111-A 《透明的聚碳酸酯+热塑性共聚酯混合物(PC+PCTA)膜 与福特WSS-M99P1.pdf

FORD WSF-M4D770-A-2010 POLYIMIDE (PI) 13% GRAPHITE POWDER 10% PTFE FILLED SINTERED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《13%石墨粉 10%聚四氟乙烯(PTFE)填充的聚酰亚胺(PI)烧结成型料 与标.pdf

FORD WSF-M4D770-A2-2010 POLYIMIDE (PI) 37% GRAPHITE POWDER FILLED SINTERED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《37%石墨粉填充的聚酰亚胺(PI)烧结成型料 与标准FORD WSS-M99P1111-A一起使.pdf