NC 90-07-11-1984 Metrological Assurance Piston-and-Weigh Gages with Upper Measurement Limits up to 250 MPa (2 500 Kgf cm2) and Precision Classes Less Than or Equal to 0 02 Verifica.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E2681-2013 Standard Guide for Environmental Management of Underground Storage Tank Systems Storing Hazardous Substances or Petroleum《存储危险物质或者石油的地下储罐系统的环境管理用标准指南》.pdf

ASTM E2682-2009 Standard Guide for Developing a Disaster Recovery Plan for Medical Transcription Departments and Businesses《医疗转移科和职业用灾祸恢复方案开发的标准指南》.pdf

ASTM E2682-2009(2014) Standard Guide for Developing a Disaster Recovery Plan for Medical Transcription Departments and Businesses《医疗转录部门和事务用灾难恢复方案开发的标准指南》.pdf

ASTM E2683-2009 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages《使用嵌装温度梯度表测量热通量的标准试验方法》.pdf

ASTM E2683-2017 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages《使用嵌装温度梯度表测量热通量的标准试验方法》.pdf

ASTM E2684-2009 Standard Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages《使用安装于表面的单维扁平式量表测量热通量的标准试验办法》.pdf

ASTM E2684-2017 Standard Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages《采用表面安装的平面测厚仪测量热流密度的标准试验方法》.pdf

ASTM E2685-2009 Standard Specification for Steel Blades Used with the Photovoltaic Module Surface Cut Test《光电模块表面切削使用用钢制刀刃的标准规范》.pdf

ASTM E2685-2015 Standard Specification for Steel Blades Used with the Photovoltaic Module Surface Cut Test《光电模块表面切削试验使用钢制刀片的标准规格》.pdf