NC 90-15-34-1987 Metrological Assurance Phasemeters Class 0 5 Methods and Means of Verification《计量保证 相位计 0 5度验证方法和手段》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 19059-1980 Rhombic throw-away (indexable) carbide cutting inserts with 80 included angle with cylindrical holes and chip-breaking flutes on one face only Design and dimensions.pdf

GOST 19061-1980 Parallelogram throw-away (indexable) carbide cutting inserts with 84 included angle and chamfered cutting edges Design and dimensions《可转位的带切削刀的84平行四边形多面的硬质合金切削刀片 结构.pdf

GOST 19062-1980 Parallelogram throw-away (indexable) carbide cutting inserts with 55 included angle and chip-breaking flutes on one face only Design and dimensions《可转位的单侧有切屑槽的55平行四.pdf

GOST 19063-1980 Pentagon throw-away (indexable) carbide cutting inserts Design and dimensions《可转位的五棱形多面的硬质合金切削刀片 结构及尺寸》.pdf

GOST 19064-1980 Pentagon throw-away (indexable) carbide cutting inserts with cylindrical holes Design and dimensions《可转位的带孔的五棱形多面的硬质合金切削刀片 结构及尺寸》.pdf

GOST 19065-1980 Pentagon throw-away (indexable) carbide cutting inserts with cylindrical holes and chip-breaking flutes on one face only Design and dimensions《可转位的带孔和单侧有切屑槽的五棱形多面的硬.pdf

GOST 19067-1980 Hexagon throw-away (indexable) carbide cutting inserts with cylindrical holes Design and dimensions《可转位的有孔的六棱形多面的硬质合金切削刀片 结构及尺寸》.pdf

GOST 19068-1980 Hexagon throw-away (indexable) carbide cutting inserts with cylindrical holes and chip-breaking flutes on one face only Design and dimensions《可转位的有孔的和单侧有切屑槽的六棱形多面的硬.pdf

GOST 19069-1980 Round throw-away (indexable) carbide cutting inserts Design and dimensions《可转位的圆形多面的硬质合金切削刀片 结构及尺寸》.pdf