1、NEMA Standards PublicationNational Electrical Manufacturers AssociationNEMA HP 100.1-1991 (R2010)High Temperature Instrumentation and Control Cables Insulated and Jacketed with FEP FluorocarbonsNEMA Standards Publication HP 100.1-1991 (R2005, R2010) High Temperature Instrumentation and Control Cable
2、s Insulated and Jacketed with FEP Fluorocarbons Reaffirmed September 10, 2010 Published by: National Electrical Manufacturers Association 1300 North 17th Street, Suite 1752 Rosslyn, Virginia 22209 www.nema.org Copyright 2010 by the National Electrical Manufacturers Association. All rights including
3、translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Artistic Works, and the International and Pan American Copyright Conventions. NOTICE AND DISCLAIMERThe information in this publication was considered technical
4、ly sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document.The National Electrical Manufacturers
5、Association (NEMA) standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered b
6、y this publication. While NEMA administers the process and establishes rules to promote fairness in the development of consensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments c
7、ontained in its standards and guideline publications.NEMA disclaims liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or relian
8、ce on this document. NEMA disclaims and makes no guaranty or warranty, express or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. NEMA doe
9、s not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide.In publishing and making this document available, NEMA is not undertaking to render professional or other services for or on behalf of any person or entity,
10、 nor is NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circums
11、tances. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication.NEMA has no power, nor does it undertake to police or enforce compliance with t
12、he contents of this document. NEMA does not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health or safetyrelated information in this document shall not be attributable to NEMA and is solely th
13、e responsibility of the certifier or maker of the statement.NEMA HPULOO-L 71 = 6470247 0503983 802 TABLE OF CONTENTS FOREWORD i SCOPE ii Section 1 REFERENCED STANDARDS AND GENERAL INFORMATION 1 Referenced Standards 1 General Information 1 Section 2 REQUIREMENTS . 3 Introduction . 3 Conductors 3 Temp
14、erature Rating . 3 Insulation . 3 Circuit Identification 7 Assembly . 7 Jackets 7 Test Procedures . 7 Tables Table 2-1 PRIMARY INSULATION THICKNESS 4 Table 2-2 INSULATION AND JACKET MATERIAL . 5 Table 2-3 OVERALL JACKET THICKNESS 7 NEMA HP*100-L 91 6470247 0503984 749 Foreword This Standards Publica
15、tion for High Temperature Instrumentation and Control Cables Insu- lated and Jacketed with FEP Fluorocarbons was developed by the High Performance Wire and Cable Section (formerly known as the High Temperature Insulated Wire and Cable Section) of the National Electrical Manufacturers Association. Na
16、tional Electrical Manufacturers Association standards are adopted in the public interest and designed to eliminate misunderstanding between the manufacturer and the user and to assist the user in selecting and obtaining the proper product for his particular need. Existence ofa National Electrical Ma
17、nufacturers Association Standard does not in any respect preclude the manufacture or use of products not conforming to the standard. Suggestions for improvements gained in the use of this standard will be welcomed. They should be sent to: Vice President, Engineering National Electrical Manufacturers
18、 Association 2101 L Street, N.W., Suite 300 Washington, DC 20037-1526 I i NEMA HPJL0O.L 91 D 6470247 0503985 b85 D Scope This Standards Publication covers specific requirements for multiple-conductor instrumenta- tion and control cables insulated and jacketed with FEP fluorocarbons. It supplements t
19、he general requirements and testingprocedures contained in NEMA StandardsPubiication HP 100. U NENA HP*i100=L 91 6470247 0503986 511 HP 100.1-1991 Page 1 HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH FEP FLUOROCARBONS Section 1 REFERENCED STANDARDS AND GENERAL INFOR
20、MATION 1.1 REFERENCED STANDARDS American Society for Testing or a maximum of 150C over tin-plated copper conductors, lead or lead-alloy coated conductors or unplated copper condudors (with strands less than 0.015). 40peration at these emergency overload temperatures shall not exceed 100 hr. in any 1
21、2 consecutive months nor more than 500 hr. during the lifetime of the cable. 51 Pa = 1 KG/m2. NEMA HP*100.1 91 b470247 0503991 987 HP 100.1-1991 Page 6 NENA HP*lOO=l 91 = 6470247 0503992 815 = HP 100.1-1991 Page 7 Table 23 Overall Jacket Thickness Calculated Diameter of Jacket Thickness Cable Under
22、Jacket Normal Duty Heavy Duty Inches mm Mils mm Mils mm 0.150 or less 3.82 or less 10 0.25 15 0.38 0.151-0.250 3.83-6.36 12 0.3 1 20 0.5 1 0.25 1-0.425 6.37-10.80 15 0.38 25 0.63 0.4260.700 10.81- 17.77 20 0.5 1 30 0.76 0.701- 1 .o00 17.78-25.40 25 0.64 45 1.14 NEMA HP*100-1 91 6470247 0503993 751 N
23、EMA STANDARDIZATION BACKGROUND The purpose of NEMA Standards, their classification, and slatus are set fonh in certain clauses of thc h%hU Siandardizarion Policies and Procedwes manual and arc rcfcrenccd bclow: Purpose of Standards National Electrical Manufacturers Association Standards are adopted
24、in the public interest and are designed to elimina= misunderstandings between the manufacturer and the purchaser and to assist the purchaser in selecting and obtaining the proper product for their panicular needs. Existence of a National Wecuical Manufacturers Association Standard does not in any re
25、spect preclude any member or nonmember from manufacturing or selling products not conforming to the standard. (Standardization Policies and Procedwes, p. 1) Definition of a Standard A Standard of the National Electrical Manufacturers Association defines a product, process or procedure with reference
26、 to one or more of the following: nomenclature, composition, dimensions, tolerances, safety, operating characteristics. performance, rating, testing, and the service for which they are designed. (Srandardizarion Policies and Procedwes. p. 2) Dimensions Where dimensions are given for interchangeabili
27、ty purposes, alternate dimensions satisfying the other provisions of the Standards Publication may be capable of otherwise equivalent performance. (Standardization Policies and Procedures, p. 8) Categories of standards National Electrical Manufacturers Association Standards are of three classes, whi
28、ch have received the affirmative vote 1. NEMA Standard, which relates to a product, process, or procedure commercially standardized and subject ta repetitive 2. Suggested Standard for Future Design, which may not have been regularly applied to a commercial product, but which 3. Adoptive Standard, wh
29、ich is adopted in whole or in part from the standards of another organization, either domestic, of at least two-thirds of the Subdivision votes cast in the aninnative or negative: manufacture. suggests a sound engineering approach to future development. regional, or international. (Standardization P
30、olicies and Procedures, pp. 7 & 16) Authorized Engineering Information Authorized Engineering Information consists of explanatory data and other engineering information of an informative character not falling within the classification of NEMA Standard or Suggested Standard for Future Design, which s
31、tandard has received the affirmative vote of at least two-thirds of the Subdivision votes cast in the affinnative or negative. (Standardization Policies and Procedures, pp. 7 & 16) Identification of Status Standards in NEMA Standards Publications are identified as “NEMA Standard,” “Suggested Standar
32、d for Future Design,” or “Adoptive Standard.” These indicate the status of the standard. A statement incorporating the auxiliary verb “shall” indicates that compliance with a requirement is mandatory for compliance with the standard. These classes of standards are identifed in the foreword or throug
33、hout the text The material identified as“Authorized Engineering Information” is designated similarly. Statements incorporating other auxiliary verbs such as “should,” “may,” etc. refer to authorized engineering information and not to pmedures required for compliance with the standard. NENA HF*LOO=L
34、qL 6470247 0503994 698 HIGH PERFORMANCE WIRE AND CABLE SECTION OF THE NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION MEMBER COMPANIES Delta Suprenant Wire and Cable Clinton,MA 01510 Philadelphia Insulated Wire Moorestown, NJ 08057 ampany American Electric Cable Company Holyoke, MA O1040 Astro Industr
35、ies, Inc. Dayton, OH 45432 Furon Company Aurora,OH 44202 Prestolite Wire Corporation Farmington Hills, MI 48018 AT&T Norcross,GA 30071 Harbour Industries, Inc. Shelburne, VT 05482 Quirk Wire Company, Inc. West Brookfield, MA 01585 Barcel Wire and Cable Corporation Irvine, CA 92714-5885 independent C
36、able, Inc. Hudson, MA 01749 Radix Wire Company Euclid, OH 44132 Kris-TEh Wire Company, Inc. Rome,NY 13440 Beiden Divisid Cooper Industries Inc. Richmond, IN 47375 The Rockbestos Company New Haven, CT 06504 Micro-Tek Corporation Cinnaminson, NJ 08077-2134 Siecor Corporation Hickory, NC 28603-0489 Ber
37、k-Tek, Inc. New Holland, PA 17557 Mohawk Wire & Cable Corporation Leominster, MA 01453 Specialty Cable Corp. Wallingford, CT 06492 Brand-Rex Company Willimantic, CT 06226 Montrose products Company Auburn,MA 01501 Teledyne Thematics Elm City, NC 27822 Cable USA, Inc. Naples, FL 33942 NEK Cable, Inc.
38、Bohemia, NY 11716 Tensolite Company St. Augustine, FL 32092 Cablec Continental Cables Company York, PA 17402-9950 The Okonite Company Ramsey,NJ 07446 Times Microwave Systems, Inc. Waiingford, CT 06492 Carol Cable Company, Inc. Pawtucket, RI 02862 hcific Electricord Company Gardena,CA 90247 Triangle
39、Wire and Cable, Inc. New Brunswick, NJ 08903 Champiain Cable Corporation Winooski,VT O5404 NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION 1300 NORTH 17TH STREET, SUITE 900 ROSSLYN. VA 22209www.NEMA.orgTO ORDER ADDITIONAL NEMA STANDARDS VISITWWW.GLOBAL.IHS.COM OR CALL 1-800-854-7179/1-303-397-79565612_0514TB
