NEN 10651 A1-1994 Sound level meters (IEC 651 1979 A1 1993)《IEC 651-1979 A1-1993 声级计》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS SR ISO 2542-1996 Internai combustion engines - Spark plug ignition - Terminology《内燃机．火花塞点火．专业术语 》.pdf

STAS SR ISO 2562-1993 Modular units for machine tool construction Slide units《机床结构的组合键．滑行单位》.pdf

STAS SR ISO 2572-1995 Textile machinery and accessories - Card gauges《纺织机械及配件．卡片测量仪表 》.pdf

STAS SR ISO 2577-1995 Plastics - Thermosetting moulding materials - Determination of shrinkage《塑料．热固性成型材料．收缩的测定 》.pdf

STAS SR ISO 2590-1995 General method for the determination of arsenic -Silver diethyldithiocarbamate photometric method《测定砷的一般方法．二乙基二硫代氨基甲酸银光度法 》.pdf

STAS SR ISO 2599-1995 Iron ores - Determination of phosphorus content -Titrimetric method《铁矿石．磷含量的测定．滴定法 》.pdf

STAS SR ISO 2605-1-1995 Steel products for pressure purposes - Derivation and verification of elevated temperature properties Part 1 Yield or proof stress of carbon and low alloy .pdf

STAS SR ISO 2605-3-1995 Steel products for pressure purposes - Derivation and verification of elevated temperature properties Part 3 An alternative procedure for deriving the elevs.pdf

STAS SR ISO 2624-1990 Copper and copper alloys Estimation of average grain size《铜及其合金．平均晶粒尺寸的估量》.pdf