NEN 10999-1993 Connecting devices Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors (IEC 999 1990 modified)《IEC 999-1990 连接器件 连接.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASME STP-PT-076-2015 HANDLING OF DIFFERENCES IN YS UTS AND CREEP RUPTURE STRENGTH BETWEEN ASME AND OTHER STANDARDS (EN AS ETC ).pdf

ASME STP-PT-077-2017 DEVELOPMENT OF WELD STRENGTH REDUCTION FACTORS AND WELD JOINT INFLUENCE FACTORS FOR SERVICE IN THE CREEP REGIME AND APPLICATION TO ASME CODES.pdf

ASME STP-PT-079-2016 LOCAL HEATING OF PIPING THERMAL ANALYSIS.pdf

ASME STP-PT-080-2016 DEVELOPMENT OF AVERAGE ISOCHRONOUS STRESS-STRAIN CURVES AND EQUATIONS AND EXTERNAL PRESSURE CHARTS AND EQUATIONS FOR 9CR-1MO-V STEEL.pdf

ASME STP-PT-081-2017 CYCLIC STRESS-STRAIN CURVES.pdf

ASME STP-PT-082-2017 STRESS INTENSITY K FACTORS FOR EXTERNAL SURFACE CRACKS IN THICK-WALLED CYLINDER VESSELS.pdf

ASME STP-PT-085-2017 EFFECT OF HOT WIRE FILLER METAL ADDITION ON GTAW HEAT INPUT FOR CORROSION RESISTANT OVERLAYS.pdf

ASME STP-PT-086-2017 EFFECTS OF HIGH TEMPERATURES AND FIT-UP OF RIVETED JOINTS ON STEEL RIVETS.pdf

ASME STP-PT-087-2018 YIELD STRENGTH VALUES UP TO MAXIMUM TEMPERATURE DESIGN.pdf