NEN 11050-1993 Transformers for tubular discharge almps having a no-load output voltage exceeding 1000 V (generally called neon-transformers) General and safety requirements (IEC 1 105.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4G443-A1-2007 NVH RUBBER SPRAYABLE PRIMER & PAINT OVEN HEAT CURING TO BE USED WITH FORD WSS-M99P1111-A 《底漆和油漆烘箱热固化型可喷施橡胶降噪和减震装置（NVH） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M4G446-A1-2015 NVH WATERBASED ACRYLIC SPRAYABLE PRIMER & PAINT OVEN HEAT CURING TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4G446-A1-2017 NVH WATERBASED ACRYLIC SPRAYABLE PRIMER & PAINT OVEN HEAT CURING TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4G449-A1-2012 NVH RUBBER HOT APPLIED ELECTROCOAT OVEN HEAT CURING TO BE USED WITH FORD WSS-M99P1111-A 《热涂电镀涂层炉内热固化的NVH橡胶 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSS-M4G450-A1-2013 SEALER SILANE MODIFIED POLYMER ONE COMPONENT MOISTURE CURING EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4G525-A1-2007 SEALER HOT APPLIED HEAT CURING LOW EXPANDING (50% - 100%) TO BE USED WITH FORD WSS-M99P1111-A 《低膨胀性（50%-100%）热固化热施涂密封剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M4G525-A2-2007 SEALER HOT APPLIED HEAT CURING EXPANDING (150% - 250%) TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M4G525-A1)《高膨胀性(150%-250%)热固化热施涂密封剂 与标准FORD WSS-.pdf

FORD WSS-M4G525-A3-2007 SEALER HOT APPLIED HEAT CURING HIGH EXPANDING (300% - 400%) TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M4G525-A1)《高膨胀性(300%-400%)热固化热施涂密封剂 与标准FORD.pdf

FORD WSS-M4G525-A3-2016 SEALER HOT APPLIED HEAT CURING HIGH EXPANDING (300% - 400%) TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4G525-A1).pdf