NEN 2486-1966 Open-top cans for milk Volumes and tooldiameters《顶部开启型乳用听罐 体积和工具直径》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 10225-2009 Weldable structural steels for fixed offshore structures - Technical delivery conditions《固定近海结构的可焊接结构钢 交付技术条件》.pdf

BS EN 10226-1-2004 Pipe threads where pressure tight joints are made on the threads Part 1 Taper external threads and parallel internal threads Dimensions tolerances and designatio.pdf

BS EN 10226-2-2005 Pipe threads where pressure tight joints are made on the threads - Part 2 Taper external threads and taper internal threads - Dimensions tolerances and designati.pdf

BS EN 10226-3-2005 Pipe threads where pressure-tight joints are made on the threads - Verification by means of limit gauges《螺纹上有压力密封接缝的管螺纹 用极限量规验证》.pdf

BS EN 10228-1-2016 Non-destructive testing of steel forgings Magnetic particle inspection《钢锻件无损检验 磁粉检验》.pdf

BS EN 10228-2-2016 Non-destructive testing of steel forgings Penetrant testing《钢锻件无损检验 渗透检验》.pdf

BS EN 10228-3-2016 Non-destructive testing of steel forgings Ultrasonic testing of ferritic or martensitic steel forgings《钢锻件无损检验 铁素体或马氏体钢锻件超声检验》.pdf

BS EN 10228-4-2016 Non-destructive testing of steel forgings Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings《钢锻件无损检验 奥氏体和奥氏体-铁素体不锈钢锻件超声检验》.pdf

BS EN 10229-1998 Evaluation of resistance of steel products to hydrogen induced cracking (HIC)《钢产品耐氢诱发断裂(HIC)的评估》.pdf