NEN 3358-1985 Small welding transformers for limited duty《有限负载小型电焊变压器》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D5045-1999(2007)e1 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials《塑料材料平面应变断裂韧性和应变能量释放率的标准试验方法》.pdf

ASTM D5045-2014 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials《塑料平面应变裂缝强度和应变能量释放速率的标准试验方法》.pdf

ASTM D5047-2005 Standard Specification for Polyethylene Terephthalate Film and Sheeting《聚对苯二甲酸乙酯薄膜和薄板的标准规范》.pdf

ASTM D5047-2009 Standard Specification for Polyethylene Terephthalate Film and Sheeting《聚乙烯薄膜和薄板标准规范》.pdf

ASTM D5047-2017 Standard Specification for Polyethylene Terephthalate Film and Sheeting《聚对苯二甲酸乙二醇酯薄膜和片材的标准规格》.pdf

ASTM D5048-2003 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame《利用125mm火焰测量固态塑料比较燃烧特性.pdf

ASTM D5048-2009 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame《利用125mm火焰测量固态塑料比较燃烧特性.pdf

ASTM D5048-2014 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame《采用125mm火焰测量固态塑料比较燃烧.pdf

ASTM D5050-1996(2007) Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts《石灰窑尘埃和硅酸盐水泥窑尘埃的商用标准指南》.pdf