NEN 6106-1988 Safety of household and similar electrical appliances -- Particular requirements for cooking ranges cooking tables ovens and similar appliances for household use《家用和类.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D626-A2-2010 POLYARYLATE (ARP) MOLDING COMPOUND HIGH HEAT RESISTANT SE INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部抗高温自熄型聚芳酯(ARP)模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSK-M4D630-A-2008 ABS MOLDING COMPOUND HIGH IMPACT INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部用耐高冲击丙烯腈-丁二烯-苯乙烯模塑料(和FORD WSS-M99P1111-A一起使用)(使用 FORD WSK-M4D827-A FORD WS.pdf

FORD WSK-M4D631-A-2008 ABS MOLDING COMPOUND HIGH COLD IMPACT INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《耐高冷冲击丙烯腈-丁二烯-苯乙烯模塑料(和FORD WSS-M99P1111-A一起使用)(使用 FORD WSK-M4D827-A FORD.pdf

FORD WSK-M4D632-A2-2005 POLYTETRAFLUOROETHYLENE (PTFE) PASTE EXTRUSION COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚四氟乙烯（PTFE）糊料挤塑成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D633-A-2012 POLYETHYLENE (PE) EXPANDED SHEET TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯(PE)扩展板 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSK-M4D635-A1-2005 ACETAL (POM) COPOLYMER MELT FLOW RATE 0 7 - 4 TO BE USED WITH FORD WSS-M99P1111-A 《熔体流动速率为0 7-4的乙缩醛共聚物（POM） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D635-A2-2005 ACETAL (POM) COPOLYMER MELT FLOW RATE 7 - 15 TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M4D635-A1)《熔体流动速率为7-15的乙缩醛共聚物(POM) 与标准FORD WSS-M99P1111-A一.pdf

FORD WSK-M4D635-A3-2005 ACETAL (POM) COPOLYMER MELT FLOW RATE 23 - 35 TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M4D635-A1)《熔体流动速率为23-35的乙缩醛共聚物(POM) 与标准FORD WSS-M99P1111-.pdf

FORD WSK-M4D635-A4-2005 ACETAL (POM) COPOLYMER MELT FLOW RATE 43 - 55 TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M4D635-A1)《熔体流动速率为43-55的乙缩醛共聚物(POM) 与标准FORD WSS-M99P1111-.pdf