NEN 6402-1991 Water- Determination of the halogen content derived from non-volatile with petroleum ether extractable organohalogen compounds (EOX)《水 从不挥发，由石油醚中提取的有机卤素化合物（EOX）中获得的卤素.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 10089-2002 en Hot rolled steels for quenched and tempered springs Technical delivery conditions《淬火和回火热轧弹簧钢 交货技术条件》.pdf

EN 10090-1998 en Valve Steels and Alloys for Internal Combustion Engines《内燃机用阀门钢和合金》.pdf

EN 10092-1-2003 en Hot rolled spring steel flat bars - Part 1 Flat bars - Dimensions and tolerances on shape and dimensions《热轧弹簧钢扁棒材 第1部分 扁棒材 形状和尺寸公差及尺寸》.pdf

EN 10092-2-2003 en Hot rolled spring steel flat bars Part 2 Ribbed and grooved spring leaves Dimensions and tolerances on shape and dimensions《热轧弹簧钢扁棒材 第2部分 有肋和凹槽簧片形状和尺寸公差及尺寸》.pdf

EN 10095-1999 en Heat Resisting Steels and Nickel Alloys《耐热钢和镍合金》.pdf

EN 1010-1-2010 en Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1 Common requirements (Incorporates Ame.pdf

EN 1010-2-2006 en Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2 Printing and varnishing machines incl.pdf

EN 1010-3-2002 en Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3 Cutting machines (Incorporates Amendm.pdf

EN 1010-4-2004 en Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4 Bookbinding paper converting and fini.pdf