NEN 7076-1984 Fingerjoints in timber - Longitudinal joints Requirements and testing《木材指形榫 纵向榫 要求和试验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NC 09-01-1967 Terminology of cold pressing technique《冷压合术语学》.pdf

NC 09-02-05-1986 Unified Elements System of Molds Dies Stampers and Machining Devices Dies Frameworks《模具统一原理系统 冲模，压模和机械装置 模具 冲模框架》.pdf

NC 09-02-06-1988 Unified Element Systern of Moulds Dies Stampers and Machining Devices Dies Bases for Dies Frameworks with Axial Layout of Guide Elements Design Specifications《模具统一.pdf

NC 09-02-10-1986 UESMDSMD Dies Framework Bases with Rectangular Working Surfaces with the Bigger Edge Backward Oriented and Rear Location of Guide Elements Design Specifications《模具.pdf

NC 09-02-12-1987 UESMDSMD Dies Framework Bases with Circular Working Surfaces and Central Columns Design Specifications《模具统一原理系统 冲模，圆形工作表面和中心圆柱框架底 设计规格》.pdf

NC 09-02-13-1986 UESMDSMD Dies Ladder Guide Columns Design Specifications《模具统一原理系统 冲模 梯子导向圆柱 设计规格》.pdf

NC 09-02-15-1987 UESMDSMD Dies Rods Design Specifications《模具统一原理系统 冲模 棒 设计规格》.pdf

NC 09-02-18-1986 Unified Elements System of Molds Dies Stampers and Machine Devices Dies Guide Plate with Circular and Rectangular Working Surface Design Specifications《模具统一原理系统 冲模.pdf

NC 09-02-1967 Dies and its parts Terminology《冲模和它的零件术语学》.pdf