NEN-EN 361-1993 Personal protective equipment against falls from a height Full body harnesses《防止从高处跌落的个人防护设备 全身式安全带》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D851-A-2011 POLYPROPYLENE (PP) FOAM CLOSED CELL 55 kg m3 DENSITY TO BE USED WITH FORD WSS-M99P1111-A 《闭室密度为55kg m2的聚丙烯(PP)膜 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSK-M4D852-A-2010 ACETAL (POM) COPOLYMER MOLYBDENUM DISULPHIDE FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《二硫化钼填充的乙缩醛共聚物（POM）成型料 与标准FORD WSS-M99P1111-A一起使用.pdf

FORD WSK-M4D855-A-1996 POLYPROPYLENE (PP) HOMOPOLYMER 20 % MINERAL GLASS FIBER FILLED REINFORCED MOLDING COMPOUND《20%矿物 玻璃纤维填充 增强的聚丙烯（PP）均聚物成型料》.pdf

FORD WSK-M4D855-A2-2011 POLYPROPYLENE (PP) HOMOPOLYMER 20% MINERAL GLASS FIBER FILLED REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《20%矿物 玻璃纤维填充 增强聚丙烯(PP)均聚物模塑.pdf

FORD WSK-M4D856-A1-2010 POLYPHENYLENE ETHER + POLYSTYRENE BLEND WSK-M4D856-A1 (PPE+PS) BLOW MOLDING COMPOUND PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A 《可印刷的聚苯醚+聚苯乙烯(PPE+PS)混合.pdf

FORD WSK-M4D857-A-2006 STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER RUBBER MODIFIED 15 % GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《15%玻璃纤维增强的苯乙烯马来酐.pdf

FORD WSK-M4D858-A-2010 POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC+PBT) MODIFIED MOLDING COMPOUND RECYCLATE TO BE USED WITH FORD WSS-M99P1111-A 《回收聚碳酸酯+聚对苯二甲酸丁二醇酯混合物(PC+.pdf

FORD WSK-M4D858-A2-2010 POLYCARBONATE + POLYBUTYLENE TEREPHTHALATE BLEND (PC+PBT) MODIFIED MOLDING COMPOUND RECYCLATE EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用回收聚碳酸酯+聚对.pdf

FORD WSK-M4D861-A2-2010 POLYPHTHALAMIDE (PPA) IMPACT MODIFIED 45% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《45%玻璃纤维增强的冲击改性聚邻苯二甲酰胺(PPA)成型料 与标准F.pdf