NEN-ISO 638-1994 Pulps Determination of dry matter content (ISO 638 1978)《ISO 638-1978 纸浆 总干物含量的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E1678-2008b Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis.pdf

ASTM E1678-2010 Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis《火灾危险分析用测定烟气毒性的标准试验方法》.pdf

ASTM E1678-2015 Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis《测量火灾危险性分析中使用的烟雾毒性的标准试验方法》.pdf

ASTM E1679-1995(2005) Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility《建筑物或建筑物有关设备适用性装配要求的标准实施规程》.pdf

ASTM E1679-1995(2012) Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility 《建筑物或建筑物有关设备适用性要求设定的标准规范》.pdf

ASTM E1679-2013 Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility and for Determining What Serviceability is Provided.pdf

ASTM E1680-1995(2003) Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems《外部金属屋面板系统漏气速率标准试验方法》.pdf

ASTM E1680-2011 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems《通过外部金属屋面板系统空气泄漏率的标准试验方法》.pdf

ASTM E1680-2016 Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems《外部金属屋顶面板系统漏气率的标准试验方法》.pdf